PDS MODELING GUIDELINE-TRAINING

PDS MODELING TRAINING

DOWNLOAD PDS MODELING TRAINING PDF.  THIS DOCUMENT HAS BEEN ADAPTED FROM THE TRAINING PROCEDURE FOLLOWED BY CHIYODA-YOKOHOMA OFFICE FOR TRAINING ON PDS-3D MODULES AND INCLUDES STEP BY STEP PROCEDURE TO COMPLETE AN EXAMPLE PLANT DESIGN PROCEDURE.

PDS Training Manual

This PDS Training manual contains the following chapters.

1. Introduction
2. Conventions
3. Getting Started
4. Structural modeling (Frame works Plus)
5. Equipment Plus
6. Piping Modeling
7. Data Verification on Diagnostics
8. Interference Checking
9. Piping Layout drawings
10. Isometric Drawing extraction
The purpose of this guide to provide in a condensed form the following:
· A description of Intergraph Plant Design System (PDS).
· How to communicate with PDS
· How to use PDS model
· How to use PDS Deliverables
This has been achieved by combining brief extracts from the many Intergraph Manuals and a set of step by step guides to building models and operating the system. Full explanations of each command will not be found in this manual. You must refer to appropriate manual for this. It is recommended that you use this manual as the core to your training on PDS and have the Intergraph user guides on hand to use as appropriate.
Download the PDS Training Manual from the below link
PDS Training Manual